Home - Outdoor Recreation Products - Beach Buddy

Beach Buddy

US Patented

Lake Weed Rake on Wheels - Beach Buddy is a simple machine for removing weeds and debris from lakes and ponds, and is easily operated by one person. Most apparatus for removing weeds have to be hauled by boat or carried by a person out to the weeds, then pulled by rope or other means to the shore by a person or vehicle. You then need to untangle the weeds from the apparatus.

Not the Beach Buddy!

Here's how it works!

By twisting the handle you can raise or lower the tines. By an easy twist of the handle this will raise the 16 tines, then roll the Beach Buddy to the exact location in the water that you want cleaned, then simply twist the handle back. By twisting the handle, the tines are lowered. Pull the Beach Buddy back slowly to shore then twist the handle again to raise the tines and the weeds will slide off the tines and be left at the shore. You are now ready to roll it back out to the weeds.

The wheels have holes in them to allow the water to enter while going into the water, and allowing water to escape while leaving the water. This feature keeps Beach Buddy on the bottom all the time. The large wheels 3" x 20" high allow Beach Buddy to easily roll on land or in the water.

This self cleaning non-motorized machine is completely built to last. The frame and the cover are built of steel & powder coated to withstand many years of use. The tines are made of carbon steel and are heat treated for strength, then chromate plated. The Wheels are made of rugged polyethylene. The handle & extensions are galvanized steel tubing.

After trying the Beach Buddy, you will agree that this is without a doubt the easiest way to get rid of those unwanted weeds without herbicides and strenuous labor. You'll be amazed at how simple weed removal can be.

The Beach Buddy Features
  • Self-cleaning tines
  • Rolls easily
  • Non-motorized
  • Durable powder coat paint
  • Rugged polyethylene wheels
  • Environmentally safe


  • Beach Buddy comes with a 16" wide T-Handle:
       - Powder coated
       - Soft cushion grips
       - Includes cutter blade 2 - 40" galvanized steel extension with post locking pins
  • Total Weight 53 lbs.
    (without handle)
  • 16 - 5/16" steel tines:
       - Heat treated for strength
       - Chromate plated to resist corrosion
  • Wheels are 20" high x 3" wide
  • Approximate total width 38 1/2"
    outer wheel to outer wheel
  • All screws, nuts & washers are stainless steel or nickel plated
  • Wheels are 20" high x 3" wide